360 Valley Pan

[TommyD]

Where is a good place to purchase a new 360 Valley Pan. I had seen them on ebay once, but missed it.

[jeepsr4ever]

most of your parts stores can get them, they list them as intake gaskets and not valley pans 80% of the time

[TommyD]

Man MC you do know it all!! I can't tell you how many hours I have spent search the web for that thing!!

Thanks!

[thigh19]

Personally, I don't care for the valley pan intake gasket. I use Mr. Gasket part # G800. It's a fiber gasket and I've never had a problem with them sealing, unlike the valley pan gasket.

[jeepsr4ever]

I dont like the valley pan gaskets either :-|

[Lifted79CJ7]

OK, so what if one takes the valley pan gasket, cuts on the middle part and just uses the sides to seal up the intake manifold? :-|
Jack

[thigh19]

You pay $35 for a gasket to cut on when Mr Gasket #G800 cost $10-$12

[Lifted79CJ7]

#-o Ahh, gotcha. So what is the bomus of having the valley pan? Does it help to move oil to the back of the engine?
Jack

[thigh19]

reflects heat away from the bottom of the intake manifold

[Barry Kaul]

I had to cut the center out of mine any ways to clear the baffle on the bottom of the intake. If I would have known that I would have just got the Mr. Gasket ones.