Pheonix
04-21-2004, 08:02 PM
I was thinking of swapping in some different pistons for my 304 to get a little bit more compression but i don't kinow which way to go, or what exact boost they provide.
I have heard that 305 pistons outof a chevy would work,
that Ford 2.3L pistons would work,
AMC 290 pistons would work,
That 1970's 304 pistons were at 9:1
and there were more, but these seemed like they needed the least amount of machining to work.
I want to add more low end power and torque but i am thinking of staying stock,
my specifications for my engine are already as follows:
Block bored .040 over
Edelbrock 1406 600cfm carb
Edelbrock Performer intake
Edelbrock Performer cam
Hedman Heders,
Bolted to a TH400 with stock converter.
i want it to still run on pump gas,
any help would suffice...... thanks
I have heard that 305 pistons outof a chevy would work,
that Ford 2.3L pistons would work,
AMC 290 pistons would work,
That 1970's 304 pistons were at 9:1
and there were more, but these seemed like they needed the least amount of machining to work.
I want to add more low end power and torque but i am thinking of staying stock,
my specifications for my engine are already as follows:
Block bored .040 over
Edelbrock 1406 600cfm carb
Edelbrock Performer intake
Edelbrock Performer cam
Hedman Heders,
Bolted to a TH400 with stock converter.
i want it to still run on pump gas,
any help would suffice...... thanks