bigun
06-21-2004, 11:18 PM
not sure where to post this so here goes, one of the guys has decided to swap in dodge 1/2 ton axles with a 727 and 440 into a scout.He just swaped 3/4 ton axles into his Ramcharger so for him this was a logical idea now actully swaping in the axles is no big deal where the trouble starts is.
A. This is to be a daily driver and we need ideas for the steering arms I am told that chevy and dodge share the same taper in the bolts in the arms but we need to know what that is and is it feasable for us to manufature our own arms or should we buy some from some one else , does bulltear have these.
We are trying to keep this guy from doing some lash up that getys him hurt or killed this is a case of older been there done that trying to keep a kid from learning the hard way. If you are wondering why I started with A I am sure this one is going to bring lots of Questians, Thank You.
A. This is to be a daily driver and we need ideas for the steering arms I am told that chevy and dodge share the same taper in the bolts in the arms but we need to know what that is and is it feasable for us to manufature our own arms or should we buy some from some one else , does bulltear have these.
We are trying to keep this guy from doing some lash up that getys him hurt or killed this is a case of older been there done that trying to keep a kid from learning the hard way. If you are wondering why I started with A I am sure this one is going to bring lots of Questians, Thank You.