PDA

View Full Version : Wrangler parts needed


Bulltear Ad
Bulltear Ad

Soylent_Green
08-03-2004, 10:58 PM
I'm getting a wicked deal on an 88' YJ

It had the 4.2, but it had caught fire, and was ditched for a Chev 350 whose previous duty was in a T-Bucket roadster.

Engine runs, adapters, mounts, and HEI ignition all in place.

Body is complete and 99% rust free with no damage, save bubbled paint on the hood, and the top of the grill is slightly crunched where the FD jacked it open to put out the fire.

I get the whole package for $1200

So, here's what I am in need of to get the thing on the road:

*Electric fuel pump / regulator OR Mechanical pump (Q-Jet 4BBL)

*Trans Cooler. (TF727)

*Radiator Factory style, or any that will fit

*gas pedal (Don't ask why, it's just not there!)


I will need to put some sort of lift into it, cause the extra weight of the 350 seems to be too much, as the axle is darn close to riding on the bumpstops. I'm thinking a SOA at least.

So, if anybody has any of this stuff, or has some ideas, message me, or call me at 651-270-5011

Thanks!!!

Bulltear Ad