jeepmonster
11-08-2004, 03:59 PM
The time has come for 343 and 360's to shine! Scat H beam rods are here!! Check out this info from Nick Alfano taken from the www.amxfiles.com! High performanc engine parts for AMC that are CHEAPER :? than Chevy!!! Life is GOOD! =D>
"they are $399.00/set. I know this
is
about $100 more than I projected they would be back in the spring but
there is easily $300-400 more value in these rods than what was
described
with the I-beam rod. The machining and bushings for the floaters
costs
about $200 to do, a H-beam rod verses an I-beam is normally $200
more, the
polishing would cost another $100-150. The cheapest comparable rod
Summit
sells is for a Chevy small block made by Eagle and costs $495. The
same
Summit brand rod costs $499.00 for a SBC and Manley is about $600.
So now
we can start to brag about building stronger and more powerful AMC
engines
for less money than a dime a dozen Chevy. Hopefully these go well.
Next
could be 390/401 rods and possibly new forged cranks. What is this
world
coming to. The SFI flex plates and balancers should be ready soon as
well."
Hope this helps
Nick Alfano
"they are $399.00/set. I know this
is
about $100 more than I projected they would be back in the spring but
there is easily $300-400 more value in these rods than what was
described
with the I-beam rod. The machining and bushings for the floaters
costs
about $200 to do, a H-beam rod verses an I-beam is normally $200
more, the
polishing would cost another $100-150. The cheapest comparable rod
Summit
sells is for a Chevy small block made by Eagle and costs $495. The
same
Summit brand rod costs $499.00 for a SBC and Manley is about $600.
So now
we can start to brag about building stronger and more powerful AMC
engines
for less money than a dime a dozen Chevy. Hopefully these go well.
Next
could be 390/401 rods and possibly new forged cranks. What is this
world
coming to. The SFI flex plates and balancers should be ready soon as
well."
Hope this helps
Nick Alfano
