pyagid
11-09-2004, 09:30 PM
First problem is I dont have a Key to the truck i purchased,so i am planning on just putting in switchs to start it,
Second problem I cant figure out the wires to the ignition switch to hotwire the thing, I tried jumping them, could get the radio to turn on, and some other accesories, just no starter cranking
I could crank the starter by jumping the solenoid on the fender, but can not get any spark to actually fire the motor, i changed teh cap, rotor, points, and condesor, gapped teh points to .020
Does anyone have a good source for a wiring diagram for a 72 J series. Every thing i see seams to skip over 72.
Last problem. I can not find a fuse box anywhere, every thing appears to be direct wired. could this be right?
thanks
-Paul
Second problem I cant figure out the wires to the ignition switch to hotwire the thing, I tried jumping them, could get the radio to turn on, and some other accesories, just no starter cranking
I could crank the starter by jumping the solenoid on the fender, but can not get any spark to actually fire the motor, i changed teh cap, rotor, points, and condesor, gapped teh points to .020
Does anyone have a good source for a wiring diagram for a 72 J series. Every thing i see seams to skip over 72.
Last problem. I can not find a fuse box anywhere, every thing appears to be direct wired. could this be right?
thanks
-Paul