Wiring

[pyagid]

First problem is I dont have a Key to the truck i purchased,so i am planning on just putting in switchs to start it,

Second problem I cant figure out the wires to the ignition switch to hotwire the thing, I tried jumping them, could get the radio to turn on, and some other accesories, just no starter cranking

I could crank the starter by jumping the solenoid on the fender, but can not get any spark to actually fire the motor, i changed teh cap, rotor, points, and condesor, gapped teh points to .020

Does anyone have a good source for a wiring diagram for a 72 J series. Every thing i see seams to skip over 72.


Last problem. I can not find a fuse box anywhere, every thing appears to be direct wired. could this be right?

thanks
-Paul

[Goose]

I have a diagram in a Haynes manual here, It is 74 and earlier.. I'll try to get it scanned in and u/l it like a pic..But it is pretty simple only shows two wires to the switch. Lt blue being everything outgoing and red being hot in. Gotta find a scanner though.
http://home.ripway.com/2004-9/176184/scanPyagidwiring.jpg

[pyagid]

sweeet thanks

-Paul