Mini-moter cam

[Mudrat]

Younger brother is looking to cam his 2.5L FI baby motor (even smaller than my 4.2!!! He's tucked away in the woods of TN somewhere and doesn't get on the net much (not even to answer his email) :roll:

So - what are the options for this FI mini-motor??? He said Chrysler used to have a mild cam, but they don't make'm anymore and he didn't know the specs. I haven't found one looking on the web for a little while.

'Nother question - is the 2.5TJ and a 93 -2.5YJ the same motor?
Thanks

Mudrat on behalf of ...

[ol' school power]

Mopar Performance lists 5 cams for the 2.5 litre.

[pyagid]

had a mopar cam in my dads 91 YJ. Only problem which was a known possibility before we installed it, is it created a miss at about 2200 rpm. We put on a MSD Digital 6 ignition, and it cleared it right up

-Paul

[Mudrat]

had a mopar cam in my dads 91 YJ. Only problem which was a known possibility before we installed it, is it created a miss at about 2200 rpm. We put on a MSD Digital 6 ignition, and it cleared it right up

-Paul
Thanks guys - He's got the MSD ignition already. Got a link for the Mopar Performance parts? I keep getting back to the Jeep page and the only parts I saw were for 2003/4 model years? http://www.moparperformance.com/

Thanks, and G'night!!

Mudrat

[pyagid]

here are the specs on a couple of them there are 2 more cams that are not listed here as well. part numbers 659 and 660 both considered "moderate-competition application adn considerd "phase V"
http://home.thezone.net/~95jeepyj/mopar_perf_camshafts.htm
here are some prices for them
http://www.wyckoff-mopar-parts.com/camshafts1.html

we purchase ours directly through a chyrsler dealership. I have the 2nd edition of this book. It is a pretty good book with good information in it part number for that from chyrsler is p5249586

http://www.jeep4.0performance.4mg.com/images/jeep_engines.jpg

[Lifted79CJ7]

All of the late YJ and Early TJ's ahd the same 4 banger. I believe the 04 and newer TJ's have a different 4 popper - same one as in the Neon's. Supposed to be really able to hop the new 4 bangers up quite a bit! I'll ask around for you though and see what I can dig up.

Jack

[ol' school power]

I just pulled up the 03 parts list for the Jeep and it's using the 2.4 and not the 2.5. Completely different animal.

[Mudrat]

I just pulled up the 03 parts list for the Jeep and it's using the 2.4 and not the 2.5. Completely different animal.
That's gunna throw a wrench into things :shock: He keeps telling me a 93 / 2.5 ... Guess I'll have to have him get me the numbers off hte block before I keep looking for squat!!

Thanks ol' School

Pat

[ol' school power]

Easy to spot by the valve cover.
The 2.5 likes like a 4.0 wih 2 cylinders worth chopped off.
The 2.4 is s lot wider. The dual overhead cam kinda gives it away.