Need help w/a Th-400-D-300

[rollbar]

I just received a Th-400 w/a torque converter & no flex plate or linkage, I was told it came out of a running J-10 w/a QT behind it. (I will rebuild it).

I have a couple of D-300 & about 3 D-20's.

Question MC & others: What do I need to do & how much will it cost (BT parts) to convert the Th-400 to the D-300 & likewise to the D-20?

Is there any problems w/the front driveshaft in refereance to the pan w/the D-300 or D-20?

The reason I ask is I have a Tf-999 in the frame of the 8 & I like the beef of the Th-400 & looking to see if I can get it done now.

Thanks for the help 111!!! ,
RollBar

[pyagid]

the part BT makes, is for a factory replacement dana 20 adapter to TH400. I believe.

if you dont want to use the quadr-trac t-case I beleive you need a different th400 case. You could probably find out more info here

http://www.novak-adapt.com

as far as the flex plate I have one here, from a 360 and also a flex plate from a tf727 to a 360

-Paul

[rollbar]

MC, this should be easy to make. :t: :mrgreen:

http://www.novak-adapt.com/catalog/kit_134.htm

Paul, how much for the plate?


Also as I recall I may need to change out the shaft to fit the 20 or 300, hummmmm.

RollBar

[Lifted79CJ7]

Yup, you need to change out the tail shaft, as well as the adapter since it has the "texas" style bolt pattern.

[rollbar]

Where do I get the shaft, no pun intended. :shock:

[grimgaunt]

Advance as well as Novak make decent adapters for the TH400 to D300, both around $400 IIRC

There are also homebrewed versions that use an appropriate o/p shaft from a chevy TH400 with a spud shaft but those require welding shafts near the splines which sounds failure prone to me.

do a search on pirate4x4 for this.

I have the Novak and like it. It also allows clocking of the D300 for additional clearance

[Mudrat]

as far as the flex plate I have one here, from a 360 and also a flex plate from a tf727 to a 360

-Paul
Do I gather from this my motor is sans flexplate? :idea:

Mudrat

[pyagid]

as far as the flex plate I have one here, from a 360 and also a flex plate from a tf727 to a 360

-Paul
Do I gather from this my motor is sans flexplate? :idea:

Mudrat

I forgot about this. Rollbar do you still need the flexplate? Sorry i have so many other projects around the house it slipped my mind

Mud do you need the flexplate for the 727? It is not to late

-Paul

[rollbar]

Paul,
Did U ship the flex plate yet, if not I don't need it cause I'm not gonna use the tranny due to the cost right now to get the shaft & adapter for the D-300.

Jim

[pyagid]

#-o That was me when i read the post

But no it was not shipped yet.

-Paul

[rollbar]

Paul, thanks to the Rat I forgot also as I to have a ton of stuff going on.

Thanks Rat & Paul. :lo1l: :t:

[rollbar]

P.S. Th-400 tranny for sale out of a running J-10. I bought it last week for $60.00 & that's the price but the shipping would be $$$$$$$$$$.

[Mudrat]

Mud do you need the flexplate for the 727? It is not to late

-Paul
Probably, um, yeah - send it too. If I find a 727 locally, I maight not be able to get the flex plate. If I can then I can give someone else a deal.

Thanks

Mudrat

[pyagid]

i will bolt it on tonight, they are supposed to pick it up between 1 and 4 tomorrow

-Paul

[Mudrat]

i will bolt it on tonight, they are supposed to pick it up between 1 and 4 tomorrow

-Paul
Cool
I'll be in the air flying home - to a snow storm :smile: So much for 75* weather :razz:

Mudrat

[Lifted79CJ7]

I know where there are two 727's as well as a couple 360's and some dana 44's, and they are right up the street from me.....a little place called U Wrench It....

8)