dyno results are in

[radamx]

434 Indy 401-1 heads
motor pull

741.6 HP at 7500 rpm
572 ft torque at 5800 rpm

1st stage nitrous 200 hp

942.9 hp at 6800 rpm
851.0 ft torque 5700 rpm

2nd stage nitrous 400 hp

1162 hp at 7300 rpm
1000.8 ft torque at 5800

[jeepmonster]

All i can say is WOW!!!! 1000+ Ft Lbs of torquw at 5800 RPM!!!! How on earth do you hook that kind of power to the ground. Wow!! Have fun at the track showing the Chevy crowd that AMC's are no longer the underdog with the new parts that are available! CONGRATULATIONS!!

[Mudrat]

1162 hp at 7300 rpm
1000.8 ft torque at 5800
WOW!!!

Now, with that RPM and a set of 44's with some 11's or 11.5's stuffed in the pumpkin, you'd be hell on a rock pile ;-)

Ok, ok. Have you had it to the track yet?

Mudrat

[radamx]

Ok been doing a little testing and I managed to pull a 9.22 at 152mph.
Still trying to figure it out. I found out that a # 8 fuel line is not big enough so back to the drawing board.
It may not sound fast for the hp but this is a 3200 pound car with 8 inch wide rear rims and street tires with Mufflers.
I tuliped a couple of valves running it lean due to fuel pressure problems so I hope to get it back together in a couple of weeks and try for the elusive 8 second pass. 111!!!
http://memimage.cardomain.net/member_images/11/web/671000-671999/671473_37_full.jpg
http://memimage.cardomain.net/member_images/11/web/671000-671999/671473_38_full.jpg
http://memimage.cardomain.net/member_images/11/web/671000-671999/671473_40_full.jpg

[Mudrat]

AWESOME RadMax


... but ...



http://www.floridajeepers.net/images/smiles/worthless.gif

[radamx]

OK I added pics

[jeepsr4ever]

Very nice numbers...I cant recall specs on the motor


LOL 1000ftlbs of torque......whew :cheers:

[BREK]

:shock: DAMN THATS REALLY MOVIN
WHERE DID YOU GET THE HOOD :idea:

[Mudrat]

Look at the ticket ... "Class" His opponent was classed as 'Pro' and he smooooookkkkeed him =D> :lo1l:

Pat

[radamx]

OK the engine is a 434 cid amc useing factory crank and block
3.825 stroke
4.25 bore
Indy 401-1 heads
AEM Ecm for the EFI system
Fogger NOS
8-coils
crank trigger
Motor plates
Indy intake
700+ lift cam
727 trans
9 inch rear with 3.89 gears

the hood is a cowl hood off a 70's humpster a little modified

http://memimage.cardomain.net/member_images/11/web/671000-671999/671473_1_full.jpg

[jeepsr4ever]

Whew yeah that looks great...I bet a strategically placed laser pointer could blind a crowd from that engine bay :idea: =D>

[Gremlin4ever]

Motor plates



This is the part I'm interested in :?

Custom or did you find them somewhere already made?

Very nice ride by the way :t:

[Mudrat]

If your looking for the block plates with vibration dampers, M.O.R.E. (http://www.mountainoffroad.com/catalog/BombProof%20MM/bombproof.htm) has some really nice ones.

Mudrat

[radamx]

Ok went back out and ran 9.09 at 152mph.
Almost my 8 second pass. soon I hope :-|
Not bad for street tires and mufflers and a 8 inch wide back rim
and yes I built the motor plates from scratch and I wish I had run them a long time ago.for a race car that is.
the hood is off a humpster amx .narrowed 3.5 inches and shortened about 4.5 inches
http://memimage.cardomain.net/member_images/11/web/671000-671999/671473_42_full.jpg