View Full Version : Rust/restore?
rollbar
03-26-2005, 02:10 PM
O.k. on the 8 I have some rusted areas I can't get @ & I want to use something that will kill the rust & NOT let it return (I can't sand the area either), a friend of mine uses OSFO & he say's U paint it after words.
I've heard of Por-15 etc. but never checked into it, I don't know if it will do what I need it to do.
I want to make it a one time deal while I have the body off the frame.
Any suggestions.
Thanks,
RollBar
Mudrat
03-27-2005, 06:22 PM
O.k. on the 8 I have some rusted areas I can't get @ & I want to use something that will kill the rust & NOT let it return (I can't sand the area either), a friend of mine uses OSFO & he say's U paint it after words.
I've heard of Por-15 etc. but never checked into it, I don't know if it will do what I need it to do.
I want to make it a one time deal while I have the body off the frame.
Any suggestions.
Thanks,
RollBar
I put POR 15 on all my running gear and frame, but Eastwood has some rattle can stuff that I've heard works just a s good, but less expensive. I used the Eastwood rust preventer after I welded up the body panels. I'm not too sure the 'rust converter' stuff works or not.
Mudrat
rollbar
03-30-2005, 02:55 PM
Thanks Rat, I'll see if we have it down here.
Mudrat
04-01-2005, 06:44 AM
Thanks Rat, I'll see if we have it down here.
Try this Jim
http://www.eastwood.com/jump.jsp?itemType=CATEGORY&itemID=372
Pat
rollbar
04-01-2005, 01:22 PM
Thanks for the excellent info Pat,
Jim
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.