PDA

View Full Version : headers


Bulltear Ad
Bulltear Ad

furweln84
04-02-2005, 11:27 AM
i have a set of new heddman IN Frame headers for a CJ with a amc v8.
heddman part number 99200.

I bought them and used them for a mock up and decided not to run them since they are so tight in the custom frame I have.
I am including the new header bolts, and the reducers, along with both headers.

the good: they have never been on a running motor, or used, besided being bolted up.

the bad: I purposely made about a 1/4" x 2" dent in one of the primary tubes in order to gain a little clearance to bolt up my hydraulic slave cylinder. It should not effect flow.

the ugly: the paint is scratched on the headers in various places due to mock up and shipping from heddman, easily fixed with engine enamel.

I would like to get $95 plus shipping (U.S. Only)

pictures available upon request, as long as the camera doesnt take a dive. Email me at Furweln97@aol.com

located in Charleston, WV.

jeepsr4ever
04-02-2005, 12:45 PM
Ohh I really like those hedmans!

Bulltear Ad