PDA

View Full Version : harmonic balancer


Bulltear Ad
Bulltear Ad

casey
04-14-2005, 12:37 PM
My '72 360 has a two belt, crank/balancer pulley and I want to use the 3 belt pulley for a/c etc...

Can I use the balancer from the '82 (acces.)donor 360?

I was thinking no because, they are not the same size. The older one is smaller/thinner than the newer one.

tufcj
04-14-2005, 01:21 PM
You can swap the balancer and lower pulley, but you'll also need to swap the water pump and upper pulley.

74 up engines used a 4 bolt lower pulley, earlier were 3 bolt. They also used a taller water pump. There may also be alignment problems with the accessories (alt and PS).

Bob
tufcj

casey
04-17-2005, 05:17 AM
Thanks, I have all the acces. and pulleys, water pump, brackets, etc...It will be nice to have a/c in this black truck in eastern NC!

Bulltear Ad