291C heads question

[mika01]

When replacing the original heads on an 89 360 with some 291C heads can I use the original pushrods/lifters? Have not changed the camshaft yet. Looking for some advice from the AMC gurus out there. :-|

[Rogue Racer]

Lifters, yes, if you are not changing the camshaft. Push rods are iffy. Depends on if the heads have been surfaced, head gasket thickness, etc. Best take some time to check the rocker arm geometry with stock push rods. Better yet, an adjustable push rod will help you determine the length of push rod you need to have correct geometry.