slagburn
07-26-2005, 03:40 PM
I just tuned/ chassis dyno'd my setup last weekend. 260 rwhp, 355 tq. I want to get the hp up a little closer to the torque and raise the powerband, right now it's done at 5000 rpm.
Currently consisting of: untouched 291c heads on dished forged pistons for about 10.5:1 CR. Blockhugger headers into 2.5 duals all the way back. Torker intake. Commander 950 throttle body 900 cfm. Full roller rockers. Current cam is the SSI from PAW at 224/234 @ .050", .496 intake .521 exhaust lift, it lopes a little bit. The setup on my heads limits me to about .550 lift until down the road when the Performer RPM heads will likely go on.
Torque is nice but need some HP, recommendations?
Currently consisting of: untouched 291c heads on dished forged pistons for about 10.5:1 CR. Blockhugger headers into 2.5 duals all the way back. Torker intake. Commander 950 throttle body 900 cfm. Full roller rockers. Current cam is the SSI from PAW at 224/234 @ .050", .496 intake .521 exhaust lift, it lopes a little bit. The setup on my heads limits me to about .550 lift until down the road when the Performer RPM heads will likely go on.
Torque is nice but need some HP, recommendations?
