Engine installed, anybody remember where the vac. lines go?

[jeep_man_401]

'Tiss the night before Christmas and not a creature was stirring...except for the sick and twisted guy in his garage...

http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00821.jpg
Double checking for fit of headers...

I did find out that with the dual oil line out of the pan the stock starter wouldn't fit...so I suppose a mini starter is in order now. :smile: Summit has one for about $215. :(: Unless some one else knows of a smaller starter with a smaller price? :idea:

One bloody mary into it...
http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00822.jpg

http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00823.jpg

and we are coming out...again. #-o Time to make some room on the firewall. :(:

http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00824.jpg





http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00827.jpg
a little hammering here...

http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00826.jpg
a little there....I hope the valve covers never have to come off. #-o

http://i4.photobucket.com/albums/y116/jeep_man_401/DSC00832.jpg
:? And there's my trucks Christmas present...it probably should get a lump of coal instead, but what the heck...with 500+hp it can haul a box car of coal now. 111!!!




Now the question...does anybody remember which vacuum lines for the quadra track run where? 3 out from the firewall are 1)black 2)black with white strip 3)black with red strip.
One goes to manifold vac. other two to lines back to tranfer case...but I need to know wich goes where. :-|

[fuzz401]

http://img.photobucket.com/albums/v153/fuzzgremlin/vac.jpg