PDA

View Full Version : cj7 304 & 727


Bulltear Ad
Bulltear Ad

OLD SCHOOL CJ
01-01-2006, 08:14 PM
I have a cj with a 304 and a 727 &dana 300 transfer case. my problem is the front drive shaft will hit the tranny, any one have this problem or do I have to swap over to a 999. thanks

Lifted79CJ7
01-01-2006, 09:46 PM
You're gonna have to run at least a 4" lift....
http://www.jeeptech.com/wiki/index.php/Transmission/Conversion/TF727

OLD SCHOOL CJ
01-03-2006, 08:57 PM
great info thanks

Lifted79CJ7
01-03-2006, 10:16 PM
No problem! Keep us updated with what you decide to do. I think either clocking the t-case, dropping the driveline at the tcase and a smaller thicker diameter tubing is going to fix it as stated in the other posts.
Good luck and keep me updated (have a 727 and 300 going in also).
Jack

Bulltear Ad