View Full Version : heim joints
ironman_gq
01-24-2006, 03:38 PM
what size heim joints would be recommended for steering on a jeep used for light wheeling with 35 inch tires
Im thinking between 1/2 and5/8 for the joints and dom tubing for the rods
jeepsr4ever
01-24-2006, 06:56 PM
3/4 thread and 5/8 hole
ironman_gq
01-24-2006, 09:38 PM
sounds good should i drill the hole to final size or ream it to final size
jeepsr4ever
01-24-2006, 10:02 PM
in the knuckle? You will need a reamer 7 degrees included for the knuckle
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.