PDA

View Full Version : Wanted: 360/4spd Combo or Seperate


Bulltear Ad
Bulltear Ad

tarra
02-08-2006, 11:46 AM
Hi,

Im looking for a 360 with a 4 speed out of a car/jeep. Or a 360 that came from a 4 speed car/jeep.

Ill consider any engine as well. 290/304/343 but would really like one that has been pulled from a 4 speed car preferably with the tranny.

Either a T-10 or an SR-4 trans will work.

Doesnt matter if its rebuilt or has been worked on, dont need original stuff.

Thanks on any leads.

Adam

KEV
02-08-2006, 12:07 PM
So you are looking for a 2wd trans that is a car type, not a T-18 or that family type. I do have a complete 1970 304 that needs rebuilding.

tarra
02-08-2006, 12:24 PM
Yes a 2wd trans. Its for a car.

I dont suppose your 304 was mated to a T-10?

Adam

tarior
02-08-2006, 03:13 PM
I have a good '69 290, 67K miles. CHEAP.

tarra
02-08-2006, 03:25 PM
Is it currently running? Where this 290 located? Was it mated to a 4 speed, if so than the motor will already be balanced for it. I think I may even have a 290 manual flywheel.

tarior
02-09-2006, 04:21 AM
It has never been out of the car. It had an auto, but if you have a 290 flywheel, you're good to go, the balance will be correct. I am in Kelso, WA.

KEV
02-09-2006, 07:20 AM
Yes a 2wd trans. Its for a car.

I dont suppose your 304 was mated to a T-10?

Adam
It had been swaped into a 73 commando

Bulltear Ad