dbesade
03-05-2006, 07:28 PM
Okay,
So my wife got orders to North Bay Canada. Now my CJ is not going to make a 2000 mile drive in one piece. I'm thinking of rebuilding/replacing/fixing the following for the trip, please give me some input on this.
Rebuild the TH400 Tranny
Rebuild Quadra-Trac
New Pinion Seals
New U-Joints
Change out Diff Fluid
HEI Distributor
New Wiring Harness
Install a damn radio
rebuild the carb
Was going to check on the following:
Pull the intake while rebuilding the carb and check the pushrods and lifters for abnormal wear and replace the lifters, pushrods, cam, and bearings if needed.
Am I missing anything that anyone could think of? Only have 5 or so months to do this and I'm a bit nervous thats not enough time... but.. watchya gunna do.
Thanks for any input anyone gives.
-Dave
The Web/Jeep Guy
So my wife got orders to North Bay Canada. Now my CJ is not going to make a 2000 mile drive in one piece. I'm thinking of rebuilding/replacing/fixing the following for the trip, please give me some input on this.
Rebuild the TH400 Tranny
Rebuild Quadra-Trac
New Pinion Seals
New U-Joints
Change out Diff Fluid
HEI Distributor
New Wiring Harness
Install a damn radio
rebuild the carb
Was going to check on the following:
Pull the intake while rebuilding the carb and check the pushrods and lifters for abnormal wear and replace the lifters, pushrods, cam, and bearings if needed.
Am I missing anything that anyone could think of? Only have 5 or so months to do this and I'm a bit nervous thats not enough time... but.. watchya gunna do.
Thanks for any input anyone gives.
-Dave
The Web/Jeep Guy