V8 exhaust manifold *picture added*

[CJim7]

Anybody have a passengerside stock exhaust man for a 304,360,401?

vehicle application CJ, J10, and i have a feeling wagoneer...

mine has an ugly crack right in the middle between the center ports.

I need this cheap as possible. Anybody install headers lately and want to get rid of extra cast iron dead-weight let me know.

i'll get some pics up tomorow for positive ID on this thing. Thanks folks :sa:
http://cruelf8.myjeeppage.com/images/401swap_007.jpg

[bls33]

ill check mine out tonight or tomarrow, and if its not cracked or any thing which i dont think it is you can have it for the price of shipping

[CJim7]

That sounds great, let me know what you find out.

*the crack was on the under/innerside of the manifold between the center ports, dont know if that's a common problem........might check that vicinity on yours.

[bls33]

Jim, I apologize for how long it is taking me, the thing is I lost the keys to my garage :(: I am extensivley searching my house for them tonight and if you still need it I'll get a pic up and send em out as soon as possible

[CJim7]

Jim, I apologize for how long it is taking me, the thing is I lost the keys to my garage :(: I am extensivley searching my house for them tonight and if you still need it I'll get a pic up and send em out as soon as possible

LOL no problem, hope you find your keys. I still need the manifold but its no huge rush, so whenever your able to get to it is fine. You dont happen to have the thick donut that bolts up to the manifold do you? Im missing the one that goes on the driverside. :-|

[bls33]

bad news, the passenger side manifold is cracked :(: the drivers side is fine but unfortunatley thats not what you need, sorry man

[KEV]

I have a few of them. I'll check the condition and let you know. That is if you still need one.

[CJim7]

bad news, the passenger side manifold is cracked :(: the drivers side is fine but unfortunatley thats not what you need, sorry man

Ahh thats a bummer, but thanks for looking.

Kevin, i might have one lined up here in my area but i need go take a look at it. i'll give you a call if this doesn't pan out.

Im wondering if this is common for the pas. side manifolds to crack like this. I have a sneaky feeling it happens when they get unbolted from the block. :-| ...but i dunno.

[CJim7]

the drivers side is fine but unfortunatley thats not what you need

hhmm...that would make for some interesting bends in my pasengerside exhaustline :-| :razz: =D>

[KEV]

the drivers side is fine but unfortunatley thats not what you need

hhmm...that would make for some interesting bends in my pasengerside exhaustline :-| :razz: =D>

It ends up dumping on top of the motor mount. :(:

[tarior]

Weld it!

[junkyard jim]

It depends what application. In FSJs they changed between '79 and '80 because the driveshaft was switched to the other side.

[JMSII]

I have that manifold. Make me an offer. Thanks!

[CJim7]

Thanks JMSII, i found one a while back....i guess i should have added a "found" post in this thread.

[JMSII]

No problemo!