View Full Version : I was an idiot and broke it. What's the best way to fix it?
zero cool
05-17-2006, 11:31 AM
Ok, I wasn't paying attention when I was bolting my engine back together. I waaaaaay overtorqued the bolt in the end of the cam and turned the washer into a nice bowl shape with a ground out section where the bolt dug in.
What can I use as a replacement for that washer? Does anyone have a spare? Can I just go to the hardware store and find one the same size and bolt it right in?
tufcj
05-17-2006, 01:17 PM
The bolt and washer are special. The head on the bolt is shorter than standard so it doesnt hit the timing cover. I doubt you'd find a heavy enough washer at a hardware store. They are available at a Mopar dealer or
http://performanceamstyle.com
http://www.americanpartsdepot.com/Engine2.htm
Bob
tufcj
zero cool
05-17-2006, 01:46 PM
The bolt and washer are special. The head on the bolt is shorter than standard so it doesnt hit the timing cover. I doubt you'd find a heavy enough washer at a hardware store. They are available at a Mopar dealer or
http://performanceamstyle.com
http://www.americanpartsdepot.com/Engine2.htm
Bob
tufcj
Thanks.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.