suspension

[jogiiara]

You could perhaps branch out into other AMC vehicles...

I would like a redesigned suspension upright with the spindle mount moved up to lower the car without cutting the springs or otherwise screwing with the geometry.

[BREK]

or how about something similar to cal-trac's or slide-a-link

[jogiiara]

I forgot to say this would be for a Javelin....



I know I know, but nobody else I have come across seems to have much interest in or ability to manufacture such a part.

[tufcj]

This was a plan for an AMX/Jav drop plate. It bolts between the knuckle and spindle. I believe it was made out of 1/2" plate, and secured with grade 8 hardware. I think the drop was in the 2" to 3" range.

http://img.photobucket.com/albums/v475/tufcj/AMX/drop_plate.jpg

Bob
tufcj

[jogiiara]

I have read about this and may go with something like it. As I understand it they used something like that on some of the factory sponsored T/A cars Penske was running in the early 70s...