PDA

View Full Version : Cam Anti-Walk Button


Bulltear Ad
Bulltear Ad

82Waggy
10-05-2006, 06:10 PM
Heading says it all.

Would provide for a complete anti-walk kit when used with the Rollmaster torrington bearing timing set.

jeepsr4ever
10-05-2006, 06:14 PM
The head of the cam retaining bolt is VERY close to the timing cover...VERY close. A cam button has been known to eat a hole in the timing cover. The only time you need a cam button/anti walk is when you are running a camshaft that isnt retained by the lifters. You can easily fab up a small plate that has a hole in it large enough for the snout of the camshaft and use a torrington bearing.

82Waggy
10-05-2006, 06:21 PM
OK

I bring it up because of the three engines I've torn down all had been grinding the dizzy gear retaining bolt into the timing cover.

Maybe the solution is a scrub plate mounted to the cover with an oval head retaining bolt?

82Waggy
11-11-2006, 07:29 AM
Here is a cam anti-walk bushing from AM Racing in Canada.

http://www.amracing.com/parts/b006/b006.html

Bulltear Ad