PDA

View Full Version : Lifter bore sleeves


Bulltear Ad
Bulltear Ad

73hornut
12-06-2006, 07:51 PM
I seriously think the best idea, for the oil system, is sleeving the lifter bores. Who makes them?

a440plus6
12-08-2006, 06:02 AM
Dunno, but I would search Mopar vendors cause from what I understand lifter bore is same size.....but I am a AMC newbie and on a learning curve on the details of almost everything.....but ask me a Mopar question.......... :?:

Rogue Racer
12-08-2006, 11:08 AM
Jesel sells an excellent quality bushing:
http://www.jeselonline.com/index.php?categoryid=82&s=ea153fcc7956f37adfd37898c7743868

So does Precision Performance Products:
http://www.pppcenter.com/06Catpgs/C018.pdf

I am sure that there are common commercial bushings that can be used. Before this process became commonplace, we used bushings from Sealed Power and Dana that were called king pin bushings. They just happened to be a size we could cut to fit and then ream to size after they were installed.

a440plus6
12-10-2006, 05:43 AM
Are the lifter bores the same size as Mopar?

Rogue Racer
12-10-2006, 07:13 AM
Yes.

a440plus6
12-10-2006, 10:02 AM
Thanks bud. :sa:

Bulltear Ad