PDA

View Full Version : Which Block


Bulltear Ad
Bulltear Ad

drobins
01-13-2007, 12:34 PM
I am new to this forum but not new to automotive work. I have seven automobiles and do 90% of all work myself or with the help of my wife.

I have two Jeep Grand Wagoneers. A 1982 and a 1987. I'm going to rebuild the engine for the 87 and add fuel injection. I'm consiering doing the rebuild on the 82 engine so I can continue to use the 87 while I do the engine work.

Otther than any defects is there any reason to favor the 87 block over the 82 block?

Thanks,
Dennis

tufcj
01-13-2007, 04:00 PM
I've heard that in the late 80s they lightened the blocks a little by removing some material from the main webs. Those blocks have 2 extra freeze plugs behind the flywheel. I really haven't heard about any difference in durability though. Unless you're building something well over 500 HP, either block should be just fine.

Bob
tufcj

drobins
01-17-2007, 08:03 PM
Thanks Bob. No big HP. Just trying to make it reliable and get as much fuel mileage as possible.

Dennis

jeepsr4ever
01-17-2007, 08:29 PM
You should get the same result from either block if they are good. Chances are they are both good if they didnt come from a siezed motor.

Bulltear Ad