Bulltear V8 engine mount conversion

[High5]

I just noticed these in the E store. Will they work for swapping a 8 for a 6 in a 1975 CJ 5????

Less expensive than the MORE mounts.

High5

[jeepsr4ever]

No they are only for the cars

[milnersXcoupe]

No they are only for the cars


Will they work in an EAGLE is the question - sell a few if they do :t:

I'm dropping out the front diff - Eagle will be 2wd - street rod -
will your engine mounts THEN work in an EAGLE ? :idea:

[hypereagle]

[quote=jeepsr4ever]No they are only for the cars


Will they work in an EAGLE is the question - sell a few if they do :t:

I'm dropping out the front diff - Eagle will be 2wd - street rod -
will your engine mounts THEN work in an EAGLE ? :idea:[ Would you possily been discouraged with put a V8 in your Eagle and keep it a 4 wheel drive I can help you out with motor mounts./quote]

[jeepsr4ever]

If the Eagle has the 2 5/16's mounting bolts in the crossmember plate then they might. Anyone have some pics of a eagle crossmember? To my knowledge the 258 had the same mount in all applications but the 232 had two different mounts (Not that we need to worry about a 232)

[milnersXcoupe]

Check this site:


http://tinyurl.com/ruqzf


-or-


http://www.users.nac.net/gr/eagleweb/v8eagle/


Eagle has same 258 engine mounts - they're just offset
2" to the passenger side via the cross member.


My understanding of Cams' conversion is that he made up
adapters that bolted to the block and to the 6 engine mounts.

:-|