14774 on Ebay I am not happy with you.

[jeepsr4ever]

This guy from Titusville stole my design for the oil pump wear plate. Not only that he is comparing our new design to a version of our old design as his upgraded plate. His claim to difference is that his plate as a smaller oil pressure bypass hole to allow a metered amount of oil to be bypassed. This is not good as the plunger and spring bypass the pressure and oil. I am not happy my design was copied and repackaged with idiotic claims. I am not flattered or impressed and will be sending a Cease and Desist letter at least to this jagoff.




Go make and design your own parts...14774 you suck!


Normally I keep a steady head when I am faced with problems.

[rollen dean montoya]

you wanna "borrow" my remmy? :2gunfire:

[Goose]

Hey mudrat.. sounds like a road trip and bag job is in order..MC be "In Need"

[rollen dean montoya]

goose, i think we need to show this fool how we deal with
people like him "1880's" style :2gunfire:

[Phil]

Lets ride in and pull a #7 on em!


Sons o Beaches anyway!

Go get em MC! stop in IA on your way back and we'll crack open a beer or 12!

[rollen dean montoya]

what do we do with the women they have?

[73hornut]

what do we do with the women they have?
Give em a beer when they get back from kickin this guys ass.

Where's the link?

[pyagid]

:snipersmile: :2gunfire:


AMC Oil Pump Wear-plate Kit for 290 thru 401 ci Motors. This is to stabilize oil pressure, whether your bottom oil pump cover is worn or not. With the installation of the kit, the oil pump gears ride on steel, not aluminum, for less expansion, and more stabilized pressure. The wear plate has a smaller hole thus limiting oil to the by-pass, and pumps more oil into the engine.

“More about the detailed difference”

The by-pass hole on our plate is much smaller. The pictures show this in detail, (arrows on the picture) . The one on the left is the one we have created. The smaller hole limit’s the amount of oil going to the bypass, also there is more contact of the oil pump gears. The image of where the oil pump gears are located show the resizing decreases the amount of oil being pumped through to the bypass which means more oil into the motor.

Included with the kit: Steel Spaces, Oil pump gaskets (2), Cap Screws (7), Washers (7), plus step by step instructions for the installation. (The second picture shows the area of the oil pump cover that the kit is designed for, the pump is not included.)

http://i22.ebayimg.com/06/i/000/89/36/7a76_1.JPG
http://i19.ebayimg.com/05/i/000/89/36/7a09_1_b.JPG
http://i7.ebayimg.com/07/i/000/89/bb/724c_1.JPG

[jeepsr4ever]

I dont even know who this guy is but my guess is that he bought one of our plates recently. His sell for $45 and are softer, dont share the same expansion and he is trying to meter the oil hole. I guess he wants part of a market that sells 10 a month

[Goose]

Well it's bullcrap.. copying a mans work like that..

[73hornut]

Well, if yours is trade marked, then fil a complaint with ebay.

[etjeep]

Definately not cool....

[donwag]

Let it go MC. You are ten fold above this guy. Put your energy into better things. Have faith in free enterprise. Do what you do best, you will survive, this guy will not.

[jeepsr4ever]

Don thats the way I see it :sa: