PDA

View Full Version : 360 Cast Pistons for 9 to 10 CR from Egge


Bulltear Ad
Bulltear Ad

AMX69PHATTY
03-15-2007, 08:46 PM
The Egge 343 pistons are only 1.570 Comp Ht, not 1.600

Found out talking on the phone with'em today.

They said if ( 10 ) sets are ordered they can make to spec.

Suggestion - 343/360 pistons 1.600 Comp Ht & 15cc dish volume

nominal 3.00 diameter dish by .110 deep with 4 eyebrows

Wouldn't there be a market for 360 cast pistons that would
yield between 9.7 and 10.2 CR using 58cc heads and
depending on deck clearance / deck mill ?
If deck and heads were both milled .012, then 0.000 deck and 10.2 CR
If combustion chambers were re-worked and opened up then lower than 10.2 CR

Just an idea.

Bulltear Ad