View Full Version : fuel eliptical and crank bolt
PaintedRat
04-09-2007, 03:47 PM
I can't find my the fuel lobe that goes on the cam, and I'm afriad I might have tossed it during rebuild. I need that, and the bolt that screws into the front of the crank. If I can just use a hardware store bolt, please let me know.
tufcj
04-09-2007, 06:59 PM
You could use a grade 8 bolt, but I doubt you'll find a heavy enough washer.
You can get what you need new at www.kennedyamerican.com or www.americanpartsdepot.com and others.
The eccentric is about $15, the bolt and washer can't be another $5.
Bob
tufcj
PaintedRat
04-10-2007, 08:54 AM
Thanks. I'll scour my garage one last time this weekend, then order what I need. I've got the washer, so no issues there. This project is dragging on too long, and stuff is starting to get shuffled around for space.
mad max
04-10-2007, 07:03 PM
shoot me an e mail if you cant find them, i can send you some, i have several.
thanx rick
ssamx39@swbell.net
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.