Scout 44 axles F&R

[FUBAR]

I've got someone that's interested in the locker so if you want the rest of the axle let me know. I'm also willing to part it out at this point.

Front is completely professionally redone with most all new parts. It also has an Eaton E-locker.

I've got way over $2000 in the front axle . I'll sell for $1500. The locker alone was over $800. I've never even used it. I was going to put them under my CJ but I'm going one ton full width instead. These are 59" WMS to WMS. If you've got a YJ and want a D300, this is the answer to the pside drop dilema.

I'll help with delivery for some gas money as long as your not in BFE. Make arrangements before assuming anything.

Located in Akron, OH.

rear axle is sold

http://i3.photobucket.com/albums/y87/craigparrish/Ebay/Scout44.jpg


http://i3.photobucket.com/albums/y87/craigparrish/Ebay/ScoutDiffCover.jpg


http://i3.photobucket.com/albums/y87/craigparrish/Ebay/ScoutRear44.jpg


http://i3.photobucket.com/albums/y87/craigparrish/Ebay/ScoutRearD44.jpg

[mike4089]

what does it take to put 44's in a cj....is there alot of custom fab work involved????

[FUBAR]

not at all. on the rear you need to cut the perches off and reweld them in the CJ place. on the front you can make some brackets that will bolt into the stock CJ spring hangers on frame where the shackle mounts. for the fixed mount, you can grind it off and mount a similar bracket.

if you buy the axles i'll move the rear perches on for nothing. if you want the front brackets made up, i can do that for about a hundred bucks for you.

the nice thing about scouts is they're both 44s and they put you at wrangler width for better stability. i was all ready to put them in and came across a great deal on one ton axles/tires/wheels so i'm going that route instead.

here's a link for your reading.
http://www.offroaders.com/info/tech-corner/project-cj7/project-cj7-d44-front-spring-mounts.htm

[FUBAR]

BUMP

[FUBAR]

To The Top

[FUBAR]

BUMP so it's TTT.

I've got someone that's interested in the locker so if you want the rest of the axle let me know. I'm also willing to part it out at this point.