View Full Version : Bulltears alternator barcket
wdwrlw
06-25-2007, 01:28 PM
I am having trouble tighten my stock bracket and was thinking of replacing this with bulltears bracket. I have seached and looked everywhere but can't seem to find a good way of installing it. The pictures I have seen on the bulltear brackets seem to be modified. Does the bracket come with instructions (meaning what holes of the block or intake are being used) and is it a direct bolt on kit?
Are there any pics with it installed top and bottom?
jeepsr4ever
06-25-2007, 02:45 PM
Here is a older pic of a customers 401
http://i2.photobucket.com/albums/y29/bulltear/ALT.jpg
jeepsr4ever
06-25-2007, 02:46 PM
Mudrats, he bent up a small piece to hold his alternator because he didnt use the spacer ( #-o )
http://members.cox.net/b-ballangel/Alt-bracket/BT_ALT-BRKT_Upper.jpg
Mudrat
06-29-2007, 05:34 PM
Mudrats, he bent up a small piece to hold his alternator because he didnt use the spacer ( #-o )
http://members.cox.net/b-ballangel/Alt-bracket/BT_ALT-BRKT_Upper.jpg
Well, that's because I didn't get a LOWER bracket I had to make one :? But it works well. There is plenty of adjustment to get the belts running true.
But if you get the full kit from BT it should have all the parts - I got a hand-me-down, almost freebie :mrgreen: so I didn't get the lower part.
Which I made out of 1/4" plate to look like this:
http://members.cox.net/b-ballangel/Alt-bracket/Homemade_ALT-BRKT_lower-1.jpg
And note I also got the underdrive pully's from BT :t:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.