View Full Version : dyno sat.
Mcktiger74cj5
09-03-2007, 05:14 PM
any body care to guess what this motor is putting out
360
stock pistons 40 over
zero deck height
3 angle valve grind
performer intake/600 carb
melling cam lift 281 int 296 exh. :onfire:
1980_Cj7
09-03-2007, 06:21 PM
I'll make a guess, just to find out what it really did, as the suspense is killing me. (I wish we could put ours on a dyno.) I guess 300 HP.
What pistons/compression ratio?
Mudrat
09-03-2007, 07:31 PM
What's the cam and carb?
350-400 unless there is some porting and polishing :wink:
jeepsr4ever
09-03-2007, 09:02 PM
330
fuzz401
09-04-2007, 05:47 AM
275
1980_Cj7
09-04-2007, 06:11 AM
OH, I think the dyno is this coming Saturday. I was thinking it was last Saturday and you already had the results and were holding out on us.
It depends on what cam & how much head work was done?
I will guess 340
AMX69PHATTY
09-04-2007, 11:29 AM
ok, I'll guess 360 HP @ 5100 from your AMC 360 :roll:
Soylent_Green
09-04-2007, 07:25 PM
300
Goose
09-05-2007, 02:20 PM
349 hp.. 400 ft lbs tourqe..
Goose
09-05-2007, 02:20 PM
349 hp.. 400 ft lbs tourqe.. 8)
Mcktiger74cj5
09-05-2007, 02:23 PM
ok guys thanks i will post sat. night.
i was told around 365 hp when i built this we will see
agian thanks
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.