CJ-8 parting out

[Dusty]

CJ-8 frame $750 Frame setup for Coils and long arms

Tub (sold)

1" body lift new $40

This is probably the easiest coil sprung CJ 8 you will ever come across. all welding and frame work done. you could be on the trail with a pretty bad ass rig Waggys rear and coils front


would like to sell frame, and front suspension with narrowed front D44 axle all as one $1500 well worth the money if you see it. 1 set of coil springs, long arms, panhard bar, dana 44 no knuckles but includes resplined inner shafts



Chevy 350 4 bolt main, 78/79 el camino motor (so i was told), ran good into the garage, still had cross hatch on cylinder walls when i had oil pan off to reseal, inside was quite clean, flywheel, clutch, new alternator, new starter, edelbrock intake, includes radiator hoses $425


T-18 (13-01)/ D20 $550 (sold)

T-18 adapter AA plate kit for a T-18 to chevy bellhousing, includes clutch fork adapter plate and bellhousing $90


chevy center dump Block hugger headers never used $125

MORE bomb proof CJ motor mounts for chevy 350 $125



Tilt steering wheel $195

PSC steering box $200 (sold)



Stock steering box, Oring fittings, good shape includes stock pitman arm with MORE steering box bracket Zinc $150

Steering shaft $30 (sold)

Drivelines $100 (sold)

NV4500/D300 $1500 (sold)

AMC401 $600 (sold)

Vanco PBS dual diaphram and Corvett MC $350

Dana 30 with air locker 4.10's 56" WMS/WMS includes tire rod and drag link $700 (local pickup preffered)


New Wagonner 5 Leaf rear springs $150 pair

Rubicon Express Long Arms and panhard bar $290 or included with frame

Old man Emu coils 2.5" 3.5" $100 a pair

Stock 20 gallon tank w/ skid plate $130 (sold)

Stock 15 Gallon tank $60

Custom SS Dash with Gauges $475 (sold)

Narrowed D44 57" WMS top WMS set of resplined stock inner shafts. 4.88 gears Setup for tj coils and TJ rubicon express long arms in a cj frame. $700 (local pickup preffered)

Narrowed D60 54.5" WMS to WMS Dutchman shafts 35 spline explorer drum brakes with dana power lok and fresh 4.88 gears 1310 U bolt yoke setup for SOA in a CJ $1000 (local pickup preffered)

Edelbrock 600 Electric choke $175 (sold)

Edelbrock 600 Electric choke $130

Edelbrock 750 Electric choke $190 includes jet kit

York AirCompressor and V-8 bracket $125 (sold)

York Air compressor $100



IIRC and the fronts were custom valved for use with a coil spring front end with no trackbar.....remote resivour. probably the best shocks i could have ever asked for considering the coilspring front end handled really well one i installed them. no track bar. fronts were 12" travel edelbrock shocks $230 on front shocks




located Santa Rosa CA

707-484-6900

[jeepsr4ever]

:smile:

[Dusty]

thats what i said too. :smile:

I'll do it again someday. With t he 401 WT Chief, and the 401 CJ-7 and the 2 CJ2a i maintain up at the ranch and the diesel chief project as well as looking at proposing soon the 8 is going to just gather cobwebs down in my lumber yard b4 it ever sees the road, better for it to get used by someone who needs it than for it to get burried under old boxes for all these years.

[jeepsr4ever]

Dusty I will still consider you a buddy if you post up a pic of said jeep. Otherwise we are in trouble mister!!!! :(:





:mrgreen:

[Dusty]

http://thumb10.webshots.net/t/48/49/3/55/9/360235509WSMxBn_th.jpg (http://rides.webshots.com/photo/1360235509060221230WSMxBn)

http://thumb10.webshots.net/t/55/455/4/38/79/2605438790060221230lgKyAX_th.jpg (http://rides.webshots.com/photo/2605438790060221230lgKyAX)

http://thumb10.webshots.net/t/24/565/9/8/80/2365908800060221230vkaOfn_th.jpg (http://rides.webshots.com/photo/2365908800060221230vkaOfn)

http://thumb10.webshots.net/t/30/466/0/2/15/2515002150060221230qMlyzp_th.jpg (http://rides.webshots.com/photo/2515002150060221230qMlyzp)

http://thumb10.webshots.net/t/55/455/2/50/80/2041250800060221230avYjhA_th.jpg (http://rides.webshots.com/photo/2041250800060221230avYjhA)

http://thumb10.webshots.net/t/28/29/5/40/35/253254035qPLrZP_th.jpg (http://rides.webshots.com/photo/1253254035060221230qPLrZP)

We all get to have our dreams so close to our finger tips only to realize that the dream is bigger than what you really need.
:sa:

5 years and $20k worth of leasons and blown up motors its time to throw in the towel ........... at least for awhile since the 6 day a week job doesnt exactly leave time for anything else

[ironman_gq]

any interest in selling the 500 edelbrock carb? I've been looking for one at a reasonable price. Should be worth about the same as a 600cfm.

[Dusty]

its a manual choke


$100?

[ironman_gq]

would you take 80? I was looking for an electric choke but I can convert it.

[Dusty]

:t: ok + shipping

I need to know whatever your zip is :lo1l:

[ironman_gq]

PM'd you

[ironman_gq]

sent payment by paypall :lo1l:

[Dusty]

shipped ups this morning :razz:

[ironman_gq]

sound amazing :sa: :mrgreen:

[ironman_gq]

got the carb today. only problem I see is that it's a 600 not a 500 like you said it was #-o

[Dusty]

Crap. it has a manual choke right?

well crap... for some reason when i checked the numbers i had it down in my mind as a 500.

Let me know what you want me to do.

i'll refund you and i'll pay the shipping getting it back out here.

Im really sorry for misleading you and getting your hopes up on that one. #-o

[ironman_gq]

I'll get it to work. I was hoping for a 500 but a 600 should work OK. I'm replacing my 600 Holley that I'm tired of trying to keep in tune. every time the weather changes up here i'm out of tune. I think i'll be fine I already got the parts coming to convert it to electric and off-road.

[Mudrat]

CJ-8 frame $1000 Frame setup for Coils and long arms
For the love of JEEPS Man . . . WHY!!! Sounds like a killer set up - wish I had seen this sooner, would have wanted the whole kit - I miss my Scambler :smile:

[Lifted79CJ7]

For the love of JEEPS Man . . . WHY!!! Sounds like a killer set up - wish I had seen this sooner, would have wanted the whole kit - I miss my Scambler :smile:


You really need to post up that pic you showed me of that thing - was as long as a limo! Oh, and it kills me to see you parting this project out - you were soooo close!!

[Mudrat]

For the love of JEEPS Man . . . WHY!!! Sounds like a killer set up - wish I had seen this sooner, would have wanted the whole kit - I miss my Scambler :smile:
You really need to post up that pic you showed me of that thing - was as long as a limo! Oh, and it kills me to see you parting this project out - you were soooo close!!
Jack,
Been posted since Mar 2004 Try HERE (http://www.bulltear.com/forums/viewtopic.php?t=1431&highlight=scrambler)

http://i18.photobucket.com/albums/b141/lvgood/Smileys/minigunbig.gif

Dam I like this smilie :mrgreen:

[Dusty]

For the love of JEEPS Man . . . WHY!!! Sounds like a killer set up - wish I had seen this sooner, would have wanted the whole kit - I miss my Scambler :smile:


You really need to post up that pic you showed me of that thing - was as long as a limo! Oh, and it kills me to see you parting this project out - you were soooo close!!

We all hit that spot in life where sometimes a toy or two has to be sacrificed to head off disaster or to re-insure that winter doesnt catch you off gaurd. this one just needed to be sacrificed.


the future wife already endorses the purchasing of another CJ8 down the road. she was pissed i sold this one


Pat did they move you out Washington now?

the frame and suspension is all still there just sold the tub off the top is all

[Mudrat]

Pat did they move you out Washington now?

That's where the bosses are - I'm the road warrior #-o . The good thing is it look's like after the Shopping Season in Everett, WA (Dec 3-22) I may be home again for a while (in VA anyway) my January Japan trip fell off the schedule today.