View Full Version : Quick Header Question
Leadbut
11-25-2007, 03:25 PM
I have a set of Hooker Super Comp Headers 7104HKR.
I recently installed later model heads (3196291-c ) while rebuilding my 1969 390.
Can I use these headers with the new heads?
If So what gasket do I use?
ironman_gq
11-25-2007, 06:04 PM
are the old heads dog leg ports if so then you should be able to.
Leadbut
11-26-2007, 07:24 AM
The old heads were the stock square ports.
The new heads are dog leg ports.
ironman_gq
11-26-2007, 02:06 PM
gonna need new headers
AMX69PHATTY
11-26-2007, 09:55 PM
Guess existing headers are also rectangular port ?
If so, yeah, would want new doglog port headers for dogleg heads.
Many opinions on gaskets, have had good luck with Mr. Gasket #5950.
Some use only red hi-temp silicone and no gasket.
Others the gaskets that come in the FelPro engine gasket set.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.