Parts interchange

[woodfar51]

I would like to put a tilt wheel in my 1976 J10. What years Grand Cherokee has a column that will fit?

[Mudrat]

I would like to put a tilt wheel in my 1976 J10. What years Grand Cherokee has a column that will fit?

A chevy column will work. Stuck one in both the CJ and YJ - both tilt wheels!

#20 = we aren't going to make #14 by Valentines day (tomorrow)

I'm disappointed. We were doing good for a couple days :smile:

GO VOTE!!!

[Goose]

any of the mid 80's FSjs should bolt right in.. they didnt change much on the SJ's .. I used an 83 wag donor for mine..

[woodfar51]

Thanks for the info. Am going on the Pull a Part web site to find what FSJs are on their lot.

[mrtazwrench]

you'll need to look for 85 and older, 86 the dash changed, that coloumn has the headlamp dimmer and wiper switch in the turn signal switch.

[woodfar51]

Seems that anything I might need for my big 10 will need to come from 85 and older. This will make trips to pull a part much easier.

Thanks for the help.

PS. Would like to hook up with someone in my area,with same type
truck, to share info on found local Jeep treasures.

[86cj7]

what about the electrical connections on the column ? i have a 74 waggie and a tilt column from a 82 g-wag is this also a plug and play ?

[Mudrat]

what about the electrical connections on the column ? i have a 74 waggie and a tilt column from a 82 g-wag is this also a plug and play ?
It is if you cut them off and use waterproof connectors like I did :mrgreen:

[ironman_gq]

anything can be made plug and play if you have the wiring diagrams and know how to solder :t:

[86cj7]

where would one find a wiring diagram for a 74 and a 82 waggie ?

[ironman_gq]

chiltons or hayes service manuals usually have em for several model years. Just go to your local parts place or even the bookstores might have em. For about 10-20 bucks they are one of the best invesments you can make for projects like these