PDA

View Full Version : 360 Bored .030

Bulltear Ad
Bulltear Ad

Used Gum
03-10-2008, 10:30 AM
What is the displacement of an AMC 360 after a .030 bore? Thanks in advance.
1980_Cj7
03-10-2008, 10:43 AM
365 CI
Used Gum
03-10-2008, 05:36 PM
Thank you sir.
1980_Cj7
03-10-2008, 07:19 PM
You are welcome. And please don't call me Sir, I was an NCO and worked for a living, ha, ha. I was respected for what I did, not the rank on my uniform.
rollen dean montoya
03-10-2008, 08:10 PM
i did too. but i put up with it . 365 sounds right . should give
you some more ponies and grunt
dan58
03-11-2008, 08:53 AM
You are welcome. And please don't call me Sir, I was an NCO and worked for a living, ha, ha. I was respected for what I did, not the rank on my uniform.


Thread hijack....

I find it's funny you say that. I work with the military all the time, and I'm accustomed to saying Sir and Ma'am. People in the general public look at me like I have three heads when I say that.
Used Gum
03-24-2008, 03:36 PM
I'm a SFC stationed at Fort Drum in New York hitting 16 years next month if that explains anything. 111!!! I, as much as anyone, appreciate veterans. :sa: Does anyone know the weight difference between stock and Edelbrock cylinder heads??? Trying to figure out the additional weight loss (gain) going aluminum among the others obvious reasons.
ironman_gq
03-24-2008, 04:55 PM
Aluminum is about 1/3 the weight of cast iron so the edelbrock heads probably weigh less than half what the stock ones do.
Used Gum
03-27-2008, 01:49 PM
Do you have an actual number (lb/kg) by any chance? Or I just could steal my wifes bathroom scale, but I just had back surgery?!
jeepsr4ever
03-27-2008, 02:03 PM
Edelbrock heads are exaclty half of the iron heads
Bulltear Ad