looking to build a very tourqy 360

[81j10honcho]

so yea i was hoping to build a 360 with close to 350-400lb-ft of tq is it posible and if so what do i need to make thing happen and would like it at lower rpms

[ironman_gq]

very easy and doable with simple mods like a cam and intake.

[81j10honcho]

what size of cam??? i dont really want to go toooo big

[ironman_gq]

should be able to do it with a mild cam like a performer or RV cam. these engines made over 300ft-lbs from the factory and really respond well to mods. just about any cam grinder can recommend a cam that will work well with whatever mods you want to make to the motor and for your intended use. I have an Engle cam in my 304 and it makes great torque from idle to 4500rpm. http://englecams.com/catalog/search_results.php
try them out. :t:

[81j10honcho]

cool thanks yea my 360 is for my j10 which is gonna be a wheeeling machine

[DolceCJ]

The 360 we rebuilt for our CJ5 was from an 88 Grand Wagoneer. Installed a Competition Cam 268H street cam (mild) with timing set. Plenty of torgue up to 5000 rpm.

[Heavy_Metal_Thunder_81]

My old Wagoneer had the Summit 8600 in it and it had GOBS or torque. Id suggest that.