View Full Version : stock '84 GW 2bbl.carb.and Edelbrock intake?
scurvy dog
11-13-2008, 09:02 PM
I'm stuck with calilforina smog laws and I can't switch out the oem carb.
So here is my problem I was under the assumption that the stock carb would fit the new Edelbrock intake #3731 EGR.To my dismay the bolt pattern is not even close.Is there any hope for me.
There is an adapter available but since there is no provision for a choke stove in the Edelbrock manifold, it doesnt matter. Its not a legal swap.
With the 2bbl, the Edelbrock manifold isnt going to give you anything anyways.
k.
ironman_gq
11-13-2008, 09:54 PM
you would be better off getting one of the C.A.R.B. approved efi kits and running that. it will give you better mileage and a pretty good bump in power and drievability over the 2bbl carb.
scurvy dog
11-13-2008, 10:29 PM
For give me, but what is a "choke stove?" If it is what I think it is, would not an electric choke work if I could get such a unit?
Thanks in advance. Bob
scurvy dog
11-13-2008, 10:38 PM
Could I get the adapter here at Bulltear? Thanks. Bob
ironman_gq
11-13-2008, 10:44 PM
the choke stove is the tube that comes off the choke houseing and loops into the intake.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.