PDA

View Full Version : what happens? update...


Bulltear Ad
Bulltear Ad

Mcktiger74cj5
02-22-2009, 11:34 AM
what happpens when you lose dist gear? will the motor still turn over?but just wont firebecause mine backfired twice and now wont fire
thanks

well another dizzy gear with a bad ending the gear was munched but talk to matt tonight and is sending out new ones.
just to let you know i was getting oil they were not dry.any guess on the cause? cam gear looks good. but will repace with matching set.

Patf10
02-22-2009, 01:03 PM
pull your dizzy and see what the gear looks like

Mcktiger74cj5
02-22-2009, 02:00 PM
well the rotor wont spin when i turn the motor cant get the dist. out only up about 1/4 of a inch.

ironman_gq
02-22-2009, 05:59 PM
take the timing cover off with the dizzy in it if you absolutely cant pull it out

jeepsr4ever
02-25-2009, 03:21 PM
We diagnosed it...pin missing from T/cover :oops:

ironman_gq
02-25-2009, 09:48 PM
did it shift to the side or something? :-|

Mcktiger74cj5
02-26-2009, 03:39 PM
im guessing just that little bit caused it ride on the cam gear funny.

ironman_gq
02-26-2009, 07:18 PM
so did it kill the gear or just skip out and not mesh?

Mudrat
02-26-2009, 07:27 PM
How? with all those bolts, how did it slide/twist/what ever?? What 'misalignment' (from torque or what ever) is allowed?

fifesjeep
02-27-2009, 10:26 AM
I imagine it dropped or rotated a little without the use of the alignment pin. I know with all my covers there is a decent amount of clearance/play between the bolts and bolt holes. I definitely wouldn't try to align it without the pins. Worst case scenario, you could always use those cheap china drill bits as alignment pins... I forgot what size I used (metric) but it was a snug fit... (I had to tap the cover with a dead blow) :oops: As for the alignment, If you think about it, the slightest offset with the given distance between the distributor opening and where the gears are supposed to mesh will have a dramatic effect on the gears meshing properly. It all boils down to a poor design. If they would've casted the blocks differently like Chevy etc things would be peachy. :wink:

Mcktiger74cj5
02-27-2009, 04:28 PM
yes killed the gear order new ones. put in pin and will try agian next week. want to thank you guy for reply to me and each other =D>

Bulltear Ad