Intake Manifold Gasket Recommendations

[The PIG Smith]

I am planning a 2BBL intake carb swap for a Holley intake and 4BBL carb.
Last time I performed this swap, I used a metal Fel-Pro valley pan gasket, shellacked the gasket surfaces and used RTV on each end.

But, I've been reading and studying some on this topic and now I think maybe there could be other options/better methods.

So, my question is: What do you recommend for a intake gasket for an AMC 360?

[CJim7]

I asked the exact same question here and the general consensus was to stick with the valley pan

[BREK]

If properly used the Mr.Gasket's work great. If you use these just make sure you have a pcv baffle on the bottom of your intake.

I used the tin gasket a couple of times & had nothing but leakage issues. Switched to the Mr.Gasket's & I havent had a problem since.