View Full Version : heads
1970amx
05-15-2009, 09:06 AM
How about a billet cnc machined copy of a Brewer head. Maybe a matching tunnel ram or blower intake to go with it.
MC you know you want to !
Rob
jeepsr4ever
05-15-2009, 11:21 AM
Working on a casting that can flow those numbers and a intake to match. Thanks though :mrgreen:
1970amx
05-15-2009, 11:27 AM
Working on a casting that can flow those numbers and a intake to match. Thanks though :mrgreen:
And you know that you need a big bore tall deck block to go with these heads and that new billet crank I see you advertising.
:)
jeepsr4ever
05-15-2009, 11:32 AM
Just brainstorming a block but nothing in the works yet. A 4.250+ bore should work great with a head flowing in the upper 3's or even lower 4's. I think if we do a block we get rid of the thrust in the cylinder and just make a standard thick wall casting. It is going to take some engineering but I think I am up to the task. With new equipment being brought in we may have a shot at this.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.