where to find 258 performance parts?

[retrorod]

Just wondering if you guys know the best place for 258 parts, my buddy was asking me if I had any idea. I know that mainly its v8 here but figured someone might have a Idea, as I have no clue.

Thanks,
Collin

[ironman_gq]

you've found it. MC has some parts. with the 258 your pretty much limited to cams, a head swap with a 4.0L, 4bbl intake, ignition, and headers. other than that its all in the machine work you have done.

[retrorod]

Cool thanks ironman I will tell my buddy to go hear, and get ahold of MC if he has any questions!

Collin

[jeepsr4ever]

We are planning and getting close to stocking


1. Forged pistons in many compression ratios
2. Bulltear made forged USA rods


We already stock crank scrapers for 4.2ltr and 4.0ltr motors

[retrorod]

Cool sounds good I will let him know thanks MC

Collin :t:

[rollen dean montoya]

also with the 258 you should upgrade the ignition with the widecap conversion for the distributor. it would consist of the
wide cap adapter, cap and rotor for the 300 I-6 ford from 1985
or 86(the 258 uses the same distributor), a 50,000 volt coil
(either an accel or msd will work i went accel racing coil)and
8mm wires also for the 300 ford. have fun with the 258.

[retrorod]

Thanks for the info R.D.M. I will pass it along to him!

Collin :t:

[rollen dean montoya]

no problem collin. did this on my eagle and it helped alot. just needed to throw away the BBD but california got testicular about the holley i put onit so back to the bbd. you should be able to get everything at napa.
enjoy, rollen