PDA

View Full Version : "MC" New P.S. pump relocation bracket is here


Bulltear Ad
Bulltear Ad

Old Rugged Crosser
04-15-2010, 08:08 PM
MC. I have a pattern for you of the PS pump relocation bracket I have made. I see lots of guys asking for it so it should be a hot item. I needed more room for my HEI dizzy as do others. It moves the PS pump down about 5-6" It still leaves room for the fuel pump.

It is simple and should be made out of 3/8" alum for rigidity. It could be made easily on your plasma table. It could be offered with 3 socket head 3/8" bolts and 2 round tube spacers to adjust for fan belt lineup.

Edit 05/09/2011:

Here are some pic's of the installation with the new bracket:
http://i908.photobucket.com/albums/ac282/lvanyi/PS%20Brackets/000_0004.jpg

http://i908.photobucket.com/albums/ac282/lvanyi/PS%20Brackets/000_0003-1.jpg

http://i908.photobucket.com/albums/ac282/lvanyi/PS%20Brackets/000_0002-1.jpg

http://i908.photobucket.com/albums/ac282/lvanyi/PS%20Brackets/000_0001.jpg

http://i908.photobucket.com/albums/ac282/lvanyi/PS%20Brackets/JeepprojectPowersteeringpumpbkt005.jpg

Old Rugged Crosser :sa:

Mudrat
04-16-2010, 06:30 PM
I'm open to moving the PS pump a few inches!!! Have the HEI issue myself.

Put your pix on photobucket (see the response to your other thread) and add in your engineering tips. If MC doesn't do it, post up and a lot of us will go with it if it works!!

'Rat :t:

Old Rugged Crosser
04-16-2010, 08:00 PM
I haven't figured out how to download from photo bucket to this site. Maybe you could give me some further instructions. Meantime I believe this is the url to my album. You can see the pictures there.


Late Edit: I figured it out. See above.


http://s908.photobucket.com/albums/ac282/lvanyi/

Old Rugged Crosser

mrtazwrench
04-16-2010, 08:01 PM
Elliott at IFSJA had some brackets ready to sell, he had inspiration from my dual pump set-up, but IIRC he made an option to do a single relocated pump. He may also be on this forum as Elliott.

Mudrat
04-16-2010, 08:22 PM
I haven't figured out how to download from photo bucket to this site. Maybe you could give me some further instructions. Meantime I believe this is the url to my album. You can see the pictures there.

http://s908.photobucket.com/albums/ac282/lvanyi/

Old Rugged Crosser
No problem, just select the img code block for your pic and copy then past into the forum.

http://i908.photobucket.com/albums/ac282/lvanyi/JeepprojectPowersteeringpumpbkt004.jpg

http://i908.photobucket.com/albums/ac282/lvanyi/JeepprojectPowersteeringpumpbkt005.jpg

jeepsr4ever
04-25-2010, 06:54 PM
Beleive me its been on the list for 8 months

73hornut
07-09-2010, 08:39 AM
So what's happening with this? I would like 1-2.

Old Rugged Crosser
07-09-2010, 12:51 PM
I think this did not go anywhere with MC. After I made my brackets for myself I sent the pattern to Mudrat as he needed one. Maybe you can get him to make you one or one of the pattern. I think MC is missing the boat on this one! :sa: :sa: :sa:

p.s. The pic's are back up! Go back to "Pictures of the PS relocation bracket post."

warhammercustoms
05-08-2011, 06:48 PM
I am looking for these brackets can anyone help me locate a set?

Old Rugged Crosser
05-09-2011, 02:22 PM
I am looking for these brackets can anyone help me locate a set?

See the pic's on the first post on this thread. I just posted some new pic's.

Is that what you are looking for?

AlbertaAMX
05-25-2013, 03:46 PM
Does this work with the Serpentine Belt system or does it place the pulley too close to the idler?

Would be cool to have a serpentine system with this bracket and the low mount alternator to really clean up the top of the engine bay....

bor
11-12-2013, 08:35 AM
Ohhh where oh where has the bracket pattern gone, oh where oh where can it be?????

Jeep Itch
04-13-2015, 06:34 AM
My goodness - this is what I have been seeking for some time - looks like it would work great with my full hydro set up - my existing bracket set up is not so great....

Any body got the plans or no if this can be purchased?

Bulltear Ad