PDA

View Full Version : MC--Poll


Bulltear Ad
Bulltear Ad

Old Rugged Crosser
05-01-2010, 09:58 AM
MC polled: Would you be seriously interested in a stroker 4340 AMC crankshaft?"

MC, What was the outcome of that poll taken I believe in 06?

Did that ever materialize? :greenjumpers:

jeepsr4ever
05-01-2010, 11:38 AM
We are going to do it but it may be out a little.

fifesjeep
05-04-2010, 01:22 AM
What's the throw going to be?
How far out are we talking?
Lastly, How much do I need to start putting away per month in-order to get ones of these bad boys? :t:

fifesjeep
11-13-2010, 04:57 PM
Do you still have plans for the 4340 cranks? I'd love to have a 4340 crank with a 3.68" stroke, basically with stock size main journals (2.747") with the smaller V-8 (290-360) journal size (2.09")...

I'm thinking 4.110 x 4.110 x .7853982 x 3.68 x 8 = 390.58 CID.... Man... Forged 11:1 pistons (Domed), Forged H-Beam Rods, 4340 crank with a 3.68" stroke, Aluminum 58-60cc Heads that flow 210 intake, 160 exhaust @ .600" lift, Hyd. roller cam, roller rockers, Dual Plain tall rise intake, BG 750 mighty demon, 1 3/4" headers, followed by a true dual "X" pipe exhaust, and of course the bulltear oiling goodies... MAN, that would be one hell of a BEAST!!!

jeepsr4ever
11-13-2010, 05:00 PM
Its in the big picture but maybe out a while

fifesjeep
11-13-2010, 05:19 PM
Gotcha... is that something that you are looking into ie: 3.68" stroke... 2.747" MJ's and 2.09" RJ's?

jeepsr4ever
11-13-2010, 05:49 PM
It sure could be done

fifesjeep
11-13-2010, 08:22 PM
It sure could be done

Hope you're not pulling my leg because if this is a good possibility (on the better half of good) I will slowly start getting my ducks in-order and then wait for the crank as desribed above. Man, if you could make that happen that would be SICK!!!
I wonder how many "360's" would be stroked out to a 390? 360 bored .030 still gives a lot of room for play... Muhahahaha
I can see/hear it now... "Whatcha Got under the Hood? That thing Sounds Sick!" Reply: "Stroked out 360 pushing 500+ hp with over 500+ ft-lbs of torque"... hahaha how sweet would that be!???!

Old Rugged Crosser
11-14-2010, 06:08 PM
Sounds like you don't know which pot to pee in.

fifesjeep
11-14-2010, 07:06 PM
Sounds like you don't know which pot to pee in.
Hell, Pee in both... if you want one to have more than the other then dump some in the other. ;)
I'd love to have an AMC 360 stroked and bored to a 390 or 396 with forged everything, aluminum heads etc... It would be the little brother of the 496 stroker... muhahahaha

Bulltear Ad