PDA

View Full Version : oil filler tube


Bulltear Ad
Bulltear Ad

superhog88
06-06-2010, 09:28 PM
what is the o.d. of the oil filler tube for a 360 and is it different for an edelbrock intake

tufcj
06-07-2010, 08:17 AM
Not sure what the exact OD is. I have run into a couple of Edelbrock manifolds where the stock tube fits loosely due to casting tolerances. One was the R4B on my AMX. I bought the stainless tube/aluminum cap from Bulltear, and had to send the tube back and have MC re-machine it with a little larger OD. Usually a film of RTV will hold it and keep it from leaking.

Bob
tufcj

jeepsr4ever
06-07-2010, 09:08 AM
The OD of the press fit portion is 1.483-1.4855

Bulltear Ad