View Full Version : AMC-360 Plug Type?
rollbar
10-24-2011, 09:32 PM
I need to buy some plugs for my '74 360 and I don't know which ones to get since I'm not a v8 guy-yet :)
I've had these in since I got the motor/build and I need to get some new ones.
Thanks,
Jim
ironman_gq
11-04-2011, 09:36 AM
Take whats in it down to the parts store and get the same ones, If your happy with them then theres no reason to change. I run Champions, Some guys run NGK, others spend more on platinum/iridium. The stock type are good for around 20-30k miles. Not a lot of difference in performance with most of the plugs on the market these days
rollbar
11-04-2011, 10:50 AM
bought some autolite 66. Was looking for 65 but they didn't have them. Copper core 66.
Had the rfly ....whatever in them from books recommendation from the PO.
tufcj
11-04-2011, 03:33 PM
I had good luck with the Champion truck plugs in my CJ. The Jeep didn't like Bosch Platinums, ended up with a cold miss. I run Autolites in the AMX.
Bob
tufcj
mrtazwrench
11-05-2011, 07:39 PM
I had good luck with the Champion truck plugs in my CJ. The Jeep didn't like Bosch Platinums, ended up with a cold miss. I run Autolites in the AMX.
Bob
tufcj
Nothing likes bosch platinums, I've had to remove lots of them from all different type of vehicles. I usually go with champions on a 360 since that was OE.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.