View Full Version : ATTN: 2012 and newer plasma gantry customers
jeepsr4ever
01-25-2012, 04:31 AM
The only print you should be using for your gantry kit is found in the CNC Plasma setup topic area. PM for a password (Only if your a current customer) Do not use any other print other than the 2012 or newer gantry kit prints (4x4, 4x8...5x10...ect) 2012 ONLY!
wickedinhere
01-26-2012, 05:45 AM
I see the cut list for the 5x10 do you have the actual dimensions?
jeepsr4ever
01-26-2012, 06:44 AM
Yes it will be up later tonight
wickedinhere
01-26-2012, 10:57 AM
Great i am making my material list as i type. I called my metal guy and made sure they stock 5x10 sheet metal and he said "i got all you can handle". LOL
BigYellowIron
01-27-2012, 03:08 AM
I sent a PM but havent received the PW yet?
jeepsr4ever
01-27-2012, 05:36 AM
Check your PMs
BigYellowIron
01-27-2012, 06:12 AM
Im an idiot, it was there i just didnt check, I thought i would get a email.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.