PDA

View Full Version : Show the world some routing projects


Bulltear Ad
Bulltear Ad

jeepsr4ever
07-04-2012, 01:22 AM
I know there are customers out there routing. Lets see some pics and video of you folks routing on your tables.

ralphxj
08-06-2012, 11:07 AM
No final projects yet, but got the router all hooked up and working!! Video of the router setup: https://docs.google.com/open?id=0B6LXMdv0XC81UnE0Mm1TLVFLdHc

Had the speed turned WAY down (like 5ipm) just to make sure everything was dialed in. You can see in the video the 48"x48" router table/deck I built that sites over the water-table. It slides on and off very easy. The next step is to build a vacuum setup to keep the dust and dirt contained.

In the background of the video, you can see the thick foam where I did my first 2 practice cuts before moving to wood.

jeepsr4ever
08-07-2012, 12:56 AM
Looks very good and very very conservative :)

ralphxj
08-07-2012, 04:33 AM
I only had one router bit and I didnt have a clue what speeds to start at!!

jeepsr4ever
08-07-2012, 05:20 AM
You may be able to go 20-100IPM

Bulltear Ad