Gantry upgrades for customers that bought from 9-01-2011 to 9-01-2013 (one month left)

[jeepsr4ever]

For those that have a gantry kit or machine bought in those months that want to upgrade to the new dual rail gantry (capable of 400ipm+ cutting speeds) the clock is ticking. We are offering a gantry exchange plus a fee for shipping and updates. We will raise the price of this upgrade feature at the end of March.

Upgrades
1. New faster/lighter Z axis (Z axis exchange) (with new MAG LOK plate)
2. Dual rail Y axis with increased rigidity (HSP high speed plasma capable)
3. Free shipping back to you

What you need to do

1. Remove your Y axis motor assembly
2. Remove your cable carrier and torch MAG-LOK plate, Z axis motor with coupler, motor mount spacers and bolts
3. Take your A axis cable out from the gantry
4. Remove gusset support bolts from gantry
5. Remove the gantry from your machine and crate up and send back to us

Bulltear
24543 Olinda trail
Scandia MN 55073

Upgrade pricing
4x4/4x8/4x10/4x12 $1188 (end of march price $2600 plus shipping)
5x5/5x8/5x10/5x12 $1533 (end of march price $2900 plus shipping)


This includes a new gantry and a new Z axis assembled and ready to install upon arrival. Turn around time is subject to change with our schedule.

[Apocalypse Fabrication]

Would it be possible to get some detailed photos of the changes? I already ordered the new Ethercut system from CandCNC, but I just saw the gantry upgrades.

Thanks

Jason

[jeepsr4ever]

Virtually identicle to this.
Lightened Z axis (gun drilled shafts, New style slide, New microswitch and wiring, 5-1 ratio (20% speed increase))
Lightened MAG-LOK plate
Dual rail gantry

391

[tlspeed1]

Did you mail out a flier or anything for this upgrade? Don't frequent this forum much but it would of been nice to know you were offering upgrades.

Thanks,

Troy

[jeepsr4ever]

Upgrades are still available and pricing has changed for the better. If you are looking to update/upgrade you need to email or PM here.

[stillworkin]

what is the pricing for this upgrade now? I attached a picture of the gantry I have. 428

[stillworkin]

429

[jeepsr4ever]

That gantry system is almost 5 years old. Young by machines standard ...but their are no upgrades for that gantry. You would be better served selling that machine and building from a Star-Lab gantry kit or buying a new table. The pan is so far from the top rail the Z axis would need 13"s of travel to reach it. All current upgrades are for machines bought from late 2011 - present

That is still a nice machine

[BorstMetalWorks]

Im interested in an upgrade if it's still available. I didnt even know it was an option till i stumbled upon this. I just ordered all new ethercut system from candcnc.